Test equipment A/D and D/A converter tester
General
The ATX7006 system is placed in a 19 inch case. The power supply voltage can switch between 110V and 230V. The controller module is supplied with touchscreen and does have the following connections on the front:
- 100/10Mbit LAN connector for network communication
- 2 USB 2.0 connector for usb devices
- PS2 connector for any ps2 mouse and/or keyboad
- VGA connector for an external monitor
- IEEE connector for GPIB communication
ATX-Hybrid
The ATX-Hybrid has 6 user assignable PXI slots. The system controller is a standard PXI System Controller.
Modules
The following module are available:
Arbitrary Waveform Generators (AWG)
- AWG20: Generate signals with 20 bit resolution, with a maximum update rate of 2MHz
- AWG16: Generate signals with 16 bit resolution, with a maximum update rate of 200MHz/400MHz
- AWG18: Generate signals with 18 bit resolution, with a maximum update rate of 300MHz or 600MHz/1200MHz interpolation
WaveForm Digitizers (WFD)
- WFD20: Capture signals with 20 bit resolution, with a maximum sample rate of 2MHz
- WFD16: Capture signals with 16 bit resolution, with a maximum sample rate of 180MHz
Digital
- Digital I/O module: Generate or capture digital signals. The maximum data rate is 50 MHz. The maximum device bits is 20 bits for parallel devices and 24 bits for serial devices. This module can also generate test control signals (clock, start conversion, SPI signals etc.) up to 50 MHz.
- Digital I/O module with low phase noise/low jitter clock source
Reference voltage and power supply
- Dual Reference Source: Two accurate and low noise reference voltages with a 20 bit resolution.
- Dual Power Supply: Two low noise power supplies with a 16 bit resolution. For PSRR measurements it can generate a modulate voltage. This module also be used as a current supply with the implemented adjustable current limiter.